Common Problems And Solutions To The Use of Copper Wire Drawing Machine
Common Problems And Solutions To The Use of Copper Wire Drawing Machine 1.Why there are black spots on the surface of the finished copper wire? Answer: First find out…
Is This Copper Rod Breakdown Machine Suitable For My Factory?
First of all, before answering this question, let us find out what characteristics they have. Normally for Copper Rod Breakdown Machine, there are mainly two types in the market….
How To Produce Qualified New Energy Automotive Cable?
How to Produce New Energy Automotive Cable 1. New Energy Automotive Cable types 1.1 Low voltage automotive cable 1) Provide power and grounding for electrical equipment. 2) Combine…
Don’t Forget Rubber Mixing Mill When Produce Rubber Cable
When you start produce the silicon cable,besides EXTRUDER, don’t forget Rubber Mixing Mill, which will help produce the silicon raw material. Details as below: SY-360L Double Drum Rubber Mixing…
The Right Way to Produce Qualified Copper Rod 8mm by Copper Scrap and Copper Cathode
If just needs 3000-6000 tons copper rod per year, usually there are two ways to do based on different raw materials. 1)Raw material is clean copper cathode. Then Copper rod…
How to Maintain Wire Drawing Machine In Holiday Caused by the COVID-19?
1.What should do after Turn off the machine ( before holiday) 1)Equipment Cleaning: Clean both inside and outside of the machine, wipe out the Copper powder or Aluminum powder. Clean…