0086-13962242532
sunman@mentorsmachinery.com
When you start produce the silicon cable,besides EXTRUDER, don’t forget Rubber Mixing Mill, which will help produce the silicon raw material. Details as below: SY-360L Double Drum Rubber Mixing…
If just needs 3000-6000 tons copper rod per year, usually there are two ways to do based on different raw materials. 1)Raw material is clean copper cathode. Then Copper rod…
1.What should do after Turn off the machine ( before holiday) 1)Equipment Cleaning: Clean both inside and outside of the machine, wipe out the Copper powder or Aluminum powder. Clean…
1. Ensure wire drawing machine keep smoothly running The surface of capstan,guide wheel should be smooth and flexible. If found the capstan with groove, then need repair on time, otherwise…
Wire drawing is a metalworking process used to reduce the cross-section of a wire and increase wire length by pulling the wire through a single or series of drawing dies….
1)Usage: If wire drawing machine especially Rod Breakdown Machine with this system, then can reduce downtime when changing the machine setup for different wire size and enhance productivity. 2)Detailed…
